Hose Reel Split Flange Swivel Joints Design: Split Flange Sizes: 1.5" to 2" Materials: Carbon Steel 316 Stainless Steel Seals: Variety of Elastomers

Features:

Easy Seal Replacement: "Split Flange" Design allows for easy replacement of seals. Open flange, replace seals, close flange. Reduces maintenance down time.

Never Lubricate: Sealed, deep groove, bearing chambers means you never have to lubricate these swivel joints.

Leak Detection Port:

1. Inspection port allows for detection of product leak when a seal leaks or
2. Allows pathway, with fittings threaded in, for nitrogen or air to be injected in to keep leaks in swivel and leak detection to be done by pressure gauges or other device. Pathway is between primary and secondary product seal.

Secondary Product Seal: Acts as a back up seal if the main product seal leaks

Other Features:

• "UL" listed to standard 567 for Liquefied Gases of Propane and Butane
• Meets B-31.3 ANSI standards for cold weather operation
• Single "deep groove" raceway design for sizes 1.5" to 2"